المياسه للمعدات الصناعية

About us

Products

Download

Blog

Our Clients

Contact Us

info@almayasauae.com

Ph:  +971 2 5559980

© Copyright AL MAYASA | Powered by MARK DESIGN

Al Mayasa Industrial Equipment

Forged Flanges MUSSAFFAH ABU DHABI Dubai Sharjah UAE

June 11, 2025

Forged Flanges MUSSAFFAH ABU DHABI Dubai Sharjah UAE

Forged Flanges MUSSAFFAH ABU DHABI Dubai Sharjah UAE are essential components used in piping systems to connect pipes, valves, pumps, and other equipment. They provide a secure, leak-proof joint that can handle high pressure, high temperature, and corrosive environments. Forged Flanges MUSSAFFAH ABU DHABI Dubai Sharjah UAE are manufactured through a forging process, which involves shaping heated metal under high pressure, resulting in superior strength and durability compared to cast flanges.

What Are Forged Flanges?

Forged Flanges MUSSAFFAH ABU DHABI Dubai Sharjah UAE are created by heating steel billets and then pressing or hammering them to the required shape using hydraulic or mechanical presses. This process improves the grain structure of the material, providing greater mechanical properties such as:

  • High tensile strength

  • Excellent toughness

  • Better fatigue resistance

  • Enhanced corrosion and pressure resistance

Types of Forged Flanges

Common types include:

  • Weld Neck Flange

  • Slip-On Flange

  • Blind Flange

  • Threaded Flange

  • Socket Weld Flange

  • Lap Joint Flange

  • Long Weld Neck Flange

  • Orifice Flange

Each type is designed for specific applications and installation requirements.

Materials Used

Forged flanges are typically made from:

  • Carbon Steel (A105, A350 LF2)

  • Alloy Steel (F11, F22)

  • Stainless Steel (304, 316, 321)

  • Duplex & Super Duplex Stainless Steel

  • Nickel Alloys, Inconel, Monel, Hastelloy

Manufacturing Standards

Forged flanges are produced according to international standards such as:

  • ASTM / ASME

  • ANSI / API / DIN

  • BS / EN / JIS

  • MSS-SP

Applications of Forged Flanges

Forged flanges are widely used across industries, including:

  • Oil & Gas

  • Petrochemical & Refinery

  • Water Supply Systems

  • Power Generation

  • Shipbuilding

  • Pharmaceutical & Food Processing

  • Construction & Heavy Engineering

Advantages of Forged Flanges MUSSAFFAH ABU DHABI Dubai Sharjah UAE

Feature Benefit
High Structural Strength Withstands high pressure and temperature
Better Fatigue Performance Increased service life
Uniform Grain Flow Reduced cracks, leaks, and porosity
Corrosion Resistant Ideal for harsh environments
Cost Effective Low maintenance and long-term reliability

Structural Steel Suppliers Dubai

Digital transformation comes with its set of challenges. Discover expert strategies to overcome obstacles and successfully transition into the digital age.

By |July 5, 2025|Categories: Al Mayasa Industrial Equipment|Tags: , , , , , , |0 Comments
Read More

Steel pipe Bolts​ & Nuts fittings suppliers in MUSSAFFAH, Sharjah  ABU DHABI

Digital transformation comes with its set of challenges. Discover expert strategies to overcome obstacles and successfully transition into the digital age.

By |June 13, 2025|Categories: Al Mayasa Industrial Equipment|0 Comments
Read More

BW Fittings & Forged Fittings MUSSAFFAH, ABU DHABI, Dubai, Sharjah UAE

Digital transformation comes with its set of challenges. Discover expert strategies to overcome obstacles and successfully transition into the digital age.

By |June 13, 2025|Categories: Al Mayasa Industrial Equipment|0 Comments
Read More
Published On: June 11, 2025Categories: Al Mayasa Industrial Equipment308 wordsViews: 916

Don’t miss

info@almayasauae.com
+971 2 5559980

As an ISO 9001: company, we follow total Quality Management System adhering to stringent process to ensure that we supply high quality products unmatched services at competitive prices. We are fully geared with the requisite technical expertise and quality control mechanism, enabling us to meet successfully meet our client’s requirement and handling complex and challenging projects. Additionally, our streamlined administration, regular follow-ups with the clients and quick order dispatch has enabled us to win the trust of our clients.

Al Mayasa is registered with almost all the major Oil & Gas related companies in Abu Dhabi like ADNOC , ADCO, TAKREER, ZADCO, ADMA- OPCO, ADOC-JAPAN, NDC, BOROUGE, NPCC and with EPC and ELECTRO MECHANICAL contractors. Continuous innovation is the watchword at Al Mayasa, we provide a range of products tailored for onsite requirements, sourced from leading manufacturer’s from EUROPE, USA, UK & JAPAN. We look forward to serve you with optimism, and assuring you of our best quality services and cooperation.

Our Vision

Al Mayasa Industrial Equipment – Sole Proprietorship LLC is led by the vision of becoming the preferred choice of customers in the Oilfield & Oilfield related clients by upholding quality, unmatched services & competitive prices.

Our Mission

Our mission is to provide the highest standard of quality and variety of steel products at the right time, exceeding service quality, with a focus on communication, quality and employee empowerment, perform as a professional, ethical, full service organization, while maintaining the ideas of respect, regard and integrity.

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Structural Steel

Forged & Cast Steel Valves

Bolts & Nuts

BW Fittings & Forged Fittings

Forged Flanges

Pipes & Tubes

Industrial Strainers

Gaskets

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

AL MAYASA PROFILE
LAME CATALOGUE
AMI CATALOGUE
RNG CATALOGUE

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Blog

Our Clients

Our primary customers include oil refineries, power plants, chemical plants, offshore platforms, and shipbuilders.

Chemical Plants

Offshore Platforms

Power Plants

Oil Refineries

Ship Builders

Gas Storage

Exclusive Agents of

For Forged Fittings
For Forged Flanges
For But-weld Fittings

Our Stock Includes

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Al Mayasa Industrial Equipment

Sole Proprietorship LLC

PO Box, 13055, Mussafah M3, Abu Dhabi, UAE.

info@almayasauae.com
Ph: +971 2 5559980

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Forged & Cast Steel Valves

(Carbon Steel and Stainless Steel)

THRU 24, Cast and Forged (SW and NPT up to 2)
Class 150 thru 1500 and #800 for Forged
GATE VALVES, GLOBE VALVES, CHECK VALVES, BUTTERFLY VALVES, NEEDLE VALVES.

MANUFACTURERS:
AMS-USA, SVS-SINGAPORE,TOHO-TAIWAN,BAJAJ-INDIA,BONNEY FORGE-ITALY,MARCK-INDIA, KISTENMACHER-GERMANY,APOLLO VALVES-USA,ETC..,

Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Industrial Strainers

Butt Weld/Socket Weld
–  SW Ends 0.5″ (15mm) to 2″+ (50mm+)
–  BW Ends 0.5″ (15mm) to 14″+ (350mm+)
–  Various forged and cast materials of construction
–  Maximum pressure ratings API 10,000lb
–  Wide range of screening materials available

Flanged
–  Sizes: 0.5″ (15mm) to 20″+ (500mm+)
–  Flanged Ends ANSI, BS4504, DIN, BS10, JIS
–  Various forged and cast materials of construction
–  Maximum pressure ratings API 10,000lb
–  Wide range of screening materials available

Screwed
–  Sizes: 0.5″ (15mm) to 2″+ (50mm+)
–  Screwed Ends API, BSP, NPT
–  Various forged and cast materials of construction
–  Maximum pressure ratings ANSI Class 1500lb
–  Wide range of screening materials available

Fabrication Y
–  Sizes: 0.5″ (15mm) to 30″+ (750mm+)
–  Flanged Ends ANSI, BS4504, DIN, BS10, JIS
–  BW Ends from Sched 40 to Sch 100 + Special Sched
–  Carbon Steel, Low-Temperature Steel, S/S, Duplex S/S Alloy Steel or other materials available
–  Maximum pressure rating class 2500lb+ (172 BarG+)

Fabrication PTFE Lined
–  Sizes: 0.5″ (15mm) to 30″+ (750mm+)
–  Flanged Ends ANSI, BS4504, DIN, BS10, JIS
–  Carbon Steel, Low Temperature Steel, S/S, Duplex S/S Alloy Steel or other materials available
–  Maximum pressure rating class 2500lb+ (172 BarG+)

Conical Strainers
–  Sizes: 0.5″ (15mm) to 30″+ (750mm+)
–  Various S/S, Monel, Duplex, Carbon
–  Maximum pressure rating class 2500lb+ (172 BarG+)

High Pressure
–  Sizes: 0.5″ (15mm) to 30″+ (750mm+)
–  Various S/S, Monel, Duplex, Carbon
–  Maximum pressure rating class 2500lb+ (172 BarG+)

Witches Hat
–  Sizes: 0.5″ (15mm) to 30″+ (750mm+)
–  Various S/S, Monel, Duplex, Carbon
–  Maximum pressure rating class 2500lb+ (172 BarG+)

Wedge Wire
–   Sizes: 0.5″ (15mm) to 30″+ (750mm+)
–  Various S/S, Monel, Duplex, Carbon
–  Maximum pressure rating class 2500lb+ (172 BarG+)
–  Basket Strainers

Basket Strainers – Single/Sloping/Multi
–  Sizes: 0.5″ (15mm) to 78″+ (1980mm+)
–  Flanged Ends ANSI, BS4504, DIN, BS10, JIS
–  BW Ends from Sched 40 to Sch 100 + Special Sched
–  Carbon Steel, Low Temperature Steel, S/S, Duplex S/S Alloy Steel or other materials available
–  Maximum pressure rating class 2500lb+ (172 BarG+)

Materials
Strainers, Filters, and Pressure Vessels are designed to meet the specific requirements of a given application
The choice or selection of materials is not only limited to the body of the unit but also the complementary components.
These materials include but are not limited to:
Body Construction
(available in standard, modified or special grades):
Carbon Steels, Low-Temperature Carbon Steels, Copper Alloys, Gunmetal, Aluminium Bronze
Stainless Steels, Duplex Stainless Steels, Super Duplex Stainless Steels, Alloy Steels, High Alloy Steels, Nickel Alloys, Other Exotic Alloys available

Internal Construction
(Basket/Element/Screen/Tray) :
Carbon Steel, Aluminium, Brass, Carpenter20*, Copper, Gold, 304, 304L, 316, 316L, 321, 347, 410, 430, Monel*, 6Mo, Duplex, Super Duplex, Titanium, Alloy20, Hastelloy* B,C and X, Inconel* 600, 601,625,718, Molybdenum, Nichrome*, Nickel 200,205,270, Waspalloy*.
Gaskets, Bolting, Washers, O-Rings, Coatings, Linings, Insulation, Jackets, Connections
Any commercially available materials. construct any Strainer, Filter, Internal or Pressure Vessel in any commercially available material
Our Strainers, Filters and Pressure Vessels designed and constructed to these codes are available in all the standard materials of construction in use today. These materials include but are not limited to:
–  Carbon Steel
–  Low-Temperature Carbon Steel
–  Stainless Steel
–  Austenitic Stainless Steels
–  *Monel & *Inconel
–  Hastalloy
–  Titanium
–  Other on request

MANUFACTURERS: EATON /HAYWARD, ETC

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Pipes & Tubes

ALMAYASA supplies pipes to all international standards such as ASTM, ASME, API, and DIN. Available in all grades in Carbon Steel, Alloy Steels, Stainless Steels in Seamless Hot Rolled, Cold Rolled as well as Welded (ERW, HFI, EFW and SAW/DSAW) pipe.

– Stainless Steel Pipes
– Line Pipe
– Tubing
– Large Diameter Pipes
– Circular Hollow Sections

MANUFACTURERS: NSSMC-JAPAN, ARCELOR MITTAL-SOUTH AFRICA/CZECH REPUBLIC, INTERPIPE-UKRAINE, JINDAL-INDIA, TUBACEX -SPAIN, TENARIS-ITALY, SANDVIK-SWEDEN,SMST-FRANCE ETC.

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Forged Flanges

(Carbon Steel and Stainless Steel)

Forged from Sch 40 thru XXS and Special Wall Thicknesses, from thru 48 and above.
Types  Weld Neck, Blind, Slip-On, Socket-Weld, Threaded, Orifice, Spectacle Blinds.
Material ATM A 105 / ASTM A350 GR. LF2 / LF3 / 304/304L, 316/316L, F321, Spectacle Blinds in GR. 60/70 and other Exotic Steel Grades.
MANUFACTURERS: RNG-INDIA, ULMA – SPAIN, METALFAR – ITALY, MELESI –  ITALY, MGI – FRANCE, VIRAJ – INDIA, W.MASS-GERMANY, BEBITZ-GERMANY,ETC

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

BW Fittings & Forged Fittings

BW Fittings
(Carbon Steel and Stainless Steel)

– Seamless & ERW stocked in Sch STD through Sch XXS, from thru 36.
– Types 90 Elbow, 45 Elbow, and Reducing Tees, Concentric and Eccentric Reducers, Y Shaped Tees, Barred Tees.
– Material  ASTM A 234 WPB, ASTM A420 WPL6, 304/304L, 316/316L, WPHY 42 Thru WPHY 80.

MANUFACTURERS:
BKL-THAILAND, BENKAN-JAPAN/THAILAND, AMI-MALAYSIA, ERNE-SAUDI ARABIA/AUSTRIA, INTERFIT-EUROPE, TK-KOREA, AWAJI-THAILAND, SBC BEND-KOREA, OMR-ITALY, TECHNOFORGE-ITALY, ETC…,

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Bolts & Nuts

Various Metric Sizes and Inches.
Grades  B7/2H, L7/GR.4 B8/B8M / 304/304L / 316/316L, Teflon / Flourocoated.

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Gaskets

Types :  CAF / CNAF/ Spiral Wound / Ring Joint

MANUFACTURERS:
SPIRA POWER, SMITH INTERNATIONAL, ADOS KLINGER, ETC..

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Structural Steel

(British Section (Universal Columns/Universal Beams) European Sections (IPE, HEA, HEB, IPEAA, etc.) Japanese Section)
CHANNELS (British (PFC), European (UPN, UPE) Japanese Channels (Light Weight & Heavyweight )
ANGLES (Equal, Unequal)
MS FLAT PRODUCTS (Cold/Hot Rolled Sheets, Hot Rolled Plates, Hot Rolled Plates, Hot Rolled Chequered Sheets/Plates, Expanded Metal Sheets)
MS TUBES (Square Hollow Tubes, ERW Pipe Class B (Medium/ASTM) Rectangular Hollow Section)

MANUFACTURERS:
SULB, KOCAER, ERDEMIR, EMIRATES STEEL, ILYICH STEEL, POSCO, DONGKUK STEEL, HYUNDAI HYSCO, KARDEMIR, ESSAR, JSW, AL JAZEERA-OMAN, COLUMBUS-SOUTH ARICA, APERAM-BRAZIL, ETC…,

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Go to Top