المياسه للمعدات الصناعية

About us

Products

Download

Blog

Our Clients

Contact Us

info@almayasauae.com

Ph:  +971 2 5559980

© Copyright AL MAYASA | Powered by MARK DESIGN

Uncategorized

LAME​ & Forged Fittings MUSSAFFAH ABU DHABI Dubai Sharjah UAE

December 15, 2025

LAME​‍​‌‍​‍‌​‍​‌‍​‍‌ Forged Fittings MUSSAFFAH ABU DHABI Dubai Sharjah UAE have been designed to offer the utmost strength, accuracy, and dependability in situations where their use is essential and critical. These fittings created through the latest forging procedures are capable of resisting high-pressure, very high or very low temperatures, and can go through a demanding service routine for a diverse range of industries.

Why Are Forged Fittings Better

By forging the metal grain structure of the metal becomes finer thus the metal has better mechanical properties when compared to any cast or fabricated metal. Some of the improved mechanical properties of LAME​ & Forged Fittings MUSSAFFAH ABU DHABI Dubai Sharjah UAE are:

lighter but stronger

  • very good resistance to fatigue and impact
  • no leaks even if under very high pressure
  • accurate and uniform in size
  • Materials & Grades

LAME​‍​‌‍​‍‌​‍​‌‍​‍‌ Forged Fittings MUSSAFFAH ABU DHABI Dubai Sharjah UAE make forged fittings from a full range of materials to meet the different environments of the operation. Some of the materials are:

  • Carbon Steel (ASTM A105)
  • Stainless Steel (ASTM A182 F304, F316, F321, F347)
  • Alloy Steel (ASTM A182 F11, F22, F5, F9)
  • Special Alloys (as per customer requirement)
  • For long service and to meet global standards every material used in the manufacture of the product is not only carefully chosen but also processed accordingly.

Product Range

LAME​‍​‌‍​‍‌​‍​‌‍​‍‌ Forged Fittings MUSSAFFAH ABU DHABI Dubai Sharjah UAE have a full range of forged fittings for sale; just to name a few:

  • Elbows (45° & 90°)
  • Tees (Equal & Reducing)
  • Couplings (Full & Half)
  • Unions
  • Caps
  • Plugs (Hex & Square)
  • Bushings
  • Crosses

Those fittings can be bought in socket weld (SW) and threaded (NPT/BSP/BSPT) versions to suit the different needs of the piping systems.

Standards & Quality Assurance
The production of LAME forged fittings meets all the essential requirements of the internationally recognized standards such as ASME B16.11, ASME B1.20.1, and corresponding ASTM specifications. In an attempt to keep the quality of products high, the company has set a very strict quality control regime which they follow closely at every step of the production process starting with the incoming inspections and ending with the final testing stage.

These quality measures ensure:

  • compliance with chemical and mechanical property requirements
  • dimensional accuracy
  • surface finish and marking traceability
  • Applications
  • LAME forged fittings are extensively being used in:
  • Oil & Gas
  • Petrochemical & Refineries
  • Power Generation
  • Chemical Processing
  • Shipbuilding
  • Pharmaceuticals
  • Hydraulic & Pneumatic ​‍​‌‍​‍‌​‍​‌‍​‍‌Systems

LAME​ & Forged Fittings MUSSAFFAH ABU DHABI Dubai Sharjah UAE

LAME​ & Forged Fittings MUSSAFFAH ABU DHABI Dubai Sharjah UAE

LAME​ & Forged Fittings MUSSAFFAH ABU DHABI Dubai Sharjah UAE

Structural Steel Suppliers Dubai

Digital transformation comes with its set of challenges. Discover expert strategies to overcome obstacles and successfully transition into the digital age.

By |July 5, 2025|Categories: Al Mayasa Industrial Equipment|Tags: , , , , , , |0 Comments
Read More

Steel pipe Bolts​ & Nuts fittings suppliers in MUSSAFFAH, Sharjah  ABU DHABI

Digital transformation comes with its set of challenges. Discover expert strategies to overcome obstacles and successfully transition into the digital age.

By |June 13, 2025|Categories: Al Mayasa Industrial Equipment|0 Comments
Read More

BW Fittings & Forged Fittings MUSSAFFAH, ABU DHABI, Dubai, Sharjah UAE

Digital transformation comes with its set of challenges. Discover expert strategies to overcome obstacles and successfully transition into the digital age.

By |June 13, 2025|Categories: Al Mayasa Industrial Equipment|0 Comments
Read More
Published On: December 15, 2025Categories: Uncategorized481 wordsViews: 365

Don’t miss

info@almayasauae.com
+971 2 5559980

As an ISO 9001: company, we follow total Quality Management System adhering to stringent process to ensure that we supply high quality products unmatched services at competitive prices. We are fully geared with the requisite technical expertise and quality control mechanism, enabling us to meet successfully meet our client’s requirement and handling complex and challenging projects. Additionally, our streamlined administration, regular follow-ups with the clients and quick order dispatch has enabled us to win the trust of our clients.

Al Mayasa is registered with almost all the major Oil & Gas related companies in Abu Dhabi like ADNOC , ADCO, TAKREER, ZADCO, ADMA- OPCO, ADOC-JAPAN, NDC, BOROUGE, NPCC and with EPC and ELECTRO MECHANICAL contractors. Continuous innovation is the watchword at Al Mayasa, we provide a range of products tailored for onsite requirements, sourced from leading manufacturer’s from EUROPE, USA, UK & JAPAN. We look forward to serve you with optimism, and assuring you of our best quality services and cooperation.

Our Vision

Al Mayasa Industrial Equipment – Sole Proprietorship LLC is led by the vision of becoming the preferred choice of customers in the Oilfield & Oilfield related clients by upholding quality, unmatched services & competitive prices.

Our Mission

Our mission is to provide the highest standard of quality and variety of steel products at the right time, exceeding service quality, with a focus on communication, quality and employee empowerment, perform as a professional, ethical, full service organization, while maintaining the ideas of respect, regard and integrity.

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Structural Steel

Forged & Cast Steel Valves

Bolts & Nuts

BW Fittings & Forged Fittings

Forged Flanges

Pipes & Tubes

Industrial Strainers

Gaskets

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

AL MAYASA PROFILE
LAME CATALOGUE
AMI CATALOGUE
RNG CATALOGUE

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Blog

Our Clients

Our primary customers include oil refineries, power plants, chemical plants, offshore platforms, and shipbuilders.

Chemical Plants

Offshore Platforms

Power Plants

Oil Refineries

Ship Builders

Gas Storage

Exclusive Agents of

For Forged Fittings
For Forged Flanges
For But-weld Fittings

Our Stock Includes

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Al Mayasa Industrial Equipment

Sole Proprietorship LLC

PO Box, 13055, Mussafah M3, Abu Dhabi, UAE.

info@almayasauae.com
Ph: +971 2 5559980

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Forged & Cast Steel Valves

(Carbon Steel and Stainless Steel)

THRU 24, Cast and Forged (SW and NPT up to 2)
Class 150 thru 1500 and #800 for Forged
GATE VALVES, GLOBE VALVES, CHECK VALVES, BUTTERFLY VALVES, NEEDLE VALVES.

MANUFACTURERS:
AMS-USA, SVS-SINGAPORE,TOHO-TAIWAN,BAJAJ-INDIA,BONNEY FORGE-ITALY,MARCK-INDIA, KISTENMACHER-GERMANY,APOLLO VALVES-USA,ETC..,

Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Industrial Strainers

Butt Weld/Socket Weld
–  SW Ends 0.5″ (15mm) to 2″+ (50mm+)
–  BW Ends 0.5″ (15mm) to 14″+ (350mm+)
–  Various forged and cast materials of construction
–  Maximum pressure ratings API 10,000lb
–  Wide range of screening materials available

Flanged
–  Sizes: 0.5″ (15mm) to 20″+ (500mm+)
–  Flanged Ends ANSI, BS4504, DIN, BS10, JIS
–  Various forged and cast materials of construction
–  Maximum pressure ratings API 10,000lb
–  Wide range of screening materials available

Screwed
–  Sizes: 0.5″ (15mm) to 2″+ (50mm+)
–  Screwed Ends API, BSP, NPT
–  Various forged and cast materials of construction
–  Maximum pressure ratings ANSI Class 1500lb
–  Wide range of screening materials available

Fabrication Y
–  Sizes: 0.5″ (15mm) to 30″+ (750mm+)
–  Flanged Ends ANSI, BS4504, DIN, BS10, JIS
–  BW Ends from Sched 40 to Sch 100 + Special Sched
–  Carbon Steel, Low-Temperature Steel, S/S, Duplex S/S Alloy Steel or other materials available
–  Maximum pressure rating class 2500lb+ (172 BarG+)

Fabrication PTFE Lined
–  Sizes: 0.5″ (15mm) to 30″+ (750mm+)
–  Flanged Ends ANSI, BS4504, DIN, BS10, JIS
–  Carbon Steel, Low Temperature Steel, S/S, Duplex S/S Alloy Steel or other materials available
–  Maximum pressure rating class 2500lb+ (172 BarG+)

Conical Strainers
–  Sizes: 0.5″ (15mm) to 30″+ (750mm+)
–  Various S/S, Monel, Duplex, Carbon
–  Maximum pressure rating class 2500lb+ (172 BarG+)

High Pressure
–  Sizes: 0.5″ (15mm) to 30″+ (750mm+)
–  Various S/S, Monel, Duplex, Carbon
–  Maximum pressure rating class 2500lb+ (172 BarG+)

Witches Hat
–  Sizes: 0.5″ (15mm) to 30″+ (750mm+)
–  Various S/S, Monel, Duplex, Carbon
–  Maximum pressure rating class 2500lb+ (172 BarG+)

Wedge Wire
–   Sizes: 0.5″ (15mm) to 30″+ (750mm+)
–  Various S/S, Monel, Duplex, Carbon
–  Maximum pressure rating class 2500lb+ (172 BarG+)
–  Basket Strainers

Basket Strainers – Single/Sloping/Multi
–  Sizes: 0.5″ (15mm) to 78″+ (1980mm+)
–  Flanged Ends ANSI, BS4504, DIN, BS10, JIS
–  BW Ends from Sched 40 to Sch 100 + Special Sched
–  Carbon Steel, Low Temperature Steel, S/S, Duplex S/S Alloy Steel or other materials available
–  Maximum pressure rating class 2500lb+ (172 BarG+)

Materials
Strainers, Filters, and Pressure Vessels are designed to meet the specific requirements of a given application
The choice or selection of materials is not only limited to the body of the unit but also the complementary components.
These materials include but are not limited to:
Body Construction
(available in standard, modified or special grades):
Carbon Steels, Low-Temperature Carbon Steels, Copper Alloys, Gunmetal, Aluminium Bronze
Stainless Steels, Duplex Stainless Steels, Super Duplex Stainless Steels, Alloy Steels, High Alloy Steels, Nickel Alloys, Other Exotic Alloys available

Internal Construction
(Basket/Element/Screen/Tray) :
Carbon Steel, Aluminium, Brass, Carpenter20*, Copper, Gold, 304, 304L, 316, 316L, 321, 347, 410, 430, Monel*, 6Mo, Duplex, Super Duplex, Titanium, Alloy20, Hastelloy* B,C and X, Inconel* 600, 601,625,718, Molybdenum, Nichrome*, Nickel 200,205,270, Waspalloy*.
Gaskets, Bolting, Washers, O-Rings, Coatings, Linings, Insulation, Jackets, Connections
Any commercially available materials. construct any Strainer, Filter, Internal or Pressure Vessel in any commercially available material
Our Strainers, Filters and Pressure Vessels designed and constructed to these codes are available in all the standard materials of construction in use today. These materials include but are not limited to:
–  Carbon Steel
–  Low-Temperature Carbon Steel
–  Stainless Steel
–  Austenitic Stainless Steels
–  *Monel & *Inconel
–  Hastalloy
–  Titanium
–  Other on request

MANUFACTURERS: EATON /HAYWARD, ETC

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Pipes & Tubes

ALMAYASA supplies pipes to all international standards such as ASTM, ASME, API, and DIN. Available in all grades in Carbon Steel, Alloy Steels, Stainless Steels in Seamless Hot Rolled, Cold Rolled as well as Welded (ERW, HFI, EFW and SAW/DSAW) pipe.

– Stainless Steel Pipes
– Line Pipe
– Tubing
– Large Diameter Pipes
– Circular Hollow Sections

MANUFACTURERS: NSSMC-JAPAN, ARCELOR MITTAL-SOUTH AFRICA/CZECH REPUBLIC, INTERPIPE-UKRAINE, JINDAL-INDIA, TUBACEX -SPAIN, TENARIS-ITALY, SANDVIK-SWEDEN,SMST-FRANCE ETC.

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Forged Flanges

(Carbon Steel and Stainless Steel)

Forged from Sch 40 thru XXS and Special Wall Thicknesses, from thru 48 and above.
Types  Weld Neck, Blind, Slip-On, Socket-Weld, Threaded, Orifice, Spectacle Blinds.
Material ATM A 105 / ASTM A350 GR. LF2 / LF3 / 304/304L, 316/316L, F321, Spectacle Blinds in GR. 60/70 and other Exotic Steel Grades.
MANUFACTURERS: RNG-INDIA, ULMA – SPAIN, METALFAR – ITALY, MELESI –  ITALY, MGI – FRANCE, VIRAJ – INDIA, W.MASS-GERMANY, BEBITZ-GERMANY,ETC

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

BW Fittings & Forged Fittings

BW Fittings
(Carbon Steel and Stainless Steel)

– Seamless & ERW stocked in Sch STD through Sch XXS, from thru 36.
– Types 90 Elbow, 45 Elbow, and Reducing Tees, Concentric and Eccentric Reducers, Y Shaped Tees, Barred Tees.
– Material  ASTM A 234 WPB, ASTM A420 WPL6, 304/304L, 316/316L, WPHY 42 Thru WPHY 80.

MANUFACTURERS:
BKL-THAILAND, BENKAN-JAPAN/THAILAND, AMI-MALAYSIA, ERNE-SAUDI ARABIA/AUSTRIA, INTERFIT-EUROPE, TK-KOREA, AWAJI-THAILAND, SBC BEND-KOREA, OMR-ITALY, TECHNOFORGE-ITALY, ETC…,

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Bolts & Nuts

Various Metric Sizes and Inches.
Grades  B7/2H, L7/GR.4 B8/B8M / 304/304L / 316/316L, Teflon / Flourocoated.

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Gaskets

Types :  CAF / CNAF/ Spiral Wound / Ring Joint

MANUFACTURERS:
SPIRA POWER, SMITH INTERNATIONAL, ADOS KLINGER, ETC..

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Structural Steel

(British Section (Universal Columns/Universal Beams) European Sections (IPE, HEA, HEB, IPEAA, etc.) Japanese Section)
CHANNELS (British (PFC), European (UPN, UPE) Japanese Channels (Light Weight & Heavyweight )
ANGLES (Equal, Unequal)
MS FLAT PRODUCTS (Cold/Hot Rolled Sheets, Hot Rolled Plates, Hot Rolled Plates, Hot Rolled Chequered Sheets/Plates, Expanded Metal Sheets)
MS TUBES (Square Hollow Tubes, ERW Pipe Class B (Medium/ASTM) Rectangular Hollow Section)

MANUFACTURERS:
SULB, KOCAER, ERDEMIR, EMIRATES STEEL, ILYICH STEEL, POSCO, DONGKUK STEEL, HYUNDAI HYSCO, KARDEMIR, ESSAR, JSW, AL JAZEERA-OMAN, COLUMBUS-SOUTH ARICA, APERAM-BRAZIL, ETC…,

© Copyright AL MAYASA Industrial Equipment | Powered by MARK DESIGN

Go to Top